A LITTLE PLANNING. A BETTER FIT.
How to measure
your kitchen.
Bring your space into focus before choosing cabinets. A clear sketch, complete dimensions, and a few photos help us understand your room.
Measure from finished surfaces. If finishes are missing, label measurements as rough and note planned thicknesses.
Walls, floor & ceiling.
- Measure every wall from corner to corner, including short returns, alcoves, and door openings.
- Measure ceiling height from the finished floor at several points; note any differences.
- Record soffits, beams, ceiling slopes, and other obstructions that could affect upper cabinets.
- Label each wall length on your sketch so every measurement has a clear location.
Every window.
- Measure each window opening’s width and height, plus its height above the finished floor.
- Measure from each wall corner to the corresponding left and right window opening edges.
- Check that the left segment, window width, and right segment add up to the wall length.
- Record trim width, sill projection, and how the window opens so cabinets leave usable space.
Mark your centerlines.
- For a sink below a window, align the sink base center with the window center.
- Mark that centerline on your sketch and record its distance from a consistent wall corner.
- If your range cannot move, measure and mark its centerline from a fixed wall corner.
- Record the range width and confirm the appliance’s installation requirements when planning surrounding cabinetry.
Note what stays.
- Mark existing plumbing, gas, outlets, switches, and vents, including their locations and heights.
- Measure appliances you are keeping and note their widths, depths, heights, and door swings.
- Label anything that cannot move, including radiators, columns, and existing appliance connections.
WINDOW & SINK · FRONT VIEW
Window center from the left wall
A + half of B = distance to the window center.
Allow for finishing layers.
- Account for drywall, trim, flooring, and other finishes that have not been installed yet.
- Write planned thicknesses beside the affected surfaces; they can change the space available for cabinets.
- Keep rough measurements clearly labeled and remeasure after finishes are installed before finalizing cabinet dimensions.
Trim and drywall can affect cabinet fit, door movement, and filler space. Include them in your plan.
Angles & filler space.
- Measure each angled wall’s length and the angle where it meets adjoining walls.
- Record the actual angle; don’t assume a corner is square or a standard angle.
- Angled layouts often need fillers on both sides of a cabinet for fit, appearance, and function.
- Plan filler widths around the wall angle, nearby trim, handles, and door and drawer movement.
- Review these details with your cabinet designer or installer before finalizing the layout.
ANGLED WALL · TOP VIEW
READY FOR THE NEXT STEP
Bring these details.
A labeled sketch and a few photos make your design conversation easier.
- Every wall length, ceiling height, and any angled wall measurements.
- Window and doorway sizes, locations, trim, and sill details.
- Sink and fixed range centerlines, plus appliance dimensions.
- Plumbing, electrical, gas, and ventilation locations.
- Planned drywall, trim, and floor thicknesses clearly labeled.
- Room photos and notes about anything that must stay.
FREE ESTIMATES · MICHIGAN & OHIO ONLY
No measurements yet?
We offer free estimates for customers in Michigan and Ohio. Call our team to arrange help with your project and discuss measuring your space.
Arrange a free estimateUse this guide to prepare your layout. Have final site dimensions, appliance requirements, and installation details verified before placing your cabinet order.